关注我们

当前位置:网站首页 > 新闻资讯 > 行业资讯
行业资讯
  • 渗漏水的检查Leakage inspection
  • 本站编辑:杭州久恒建材有限公司发布日期:2017-02-06 09:39
地下室防水工程中,常见的渗漏现象普通分为慢渗、快渗、急流、高压急流等。在修堵前,必需找出渗漏水点的准确位置,才干做到对症下药。漏水量大的部位能够直接察看到。
慢渗可参照以下两种办
法停止检查
In a basement waterproofing project, common leakage phenomenon is divided into slow and fast permeability, rapids, high pressure rapids, etc. Before repairing the wall, it is necessary to fi
nd out the accurate positioning of the seepage, talents suit the remedy to the case. Leakage of large parts can be seen directly. Slow seepage can refer to the following two ways to stop check
 
(1) 漏水部位擦干,立刻在漏水处薄薄地撒上一层干水泥,外表呈现的湿点或湿线处就是漏水的孔或缝

Dry leakage part, in thin leaks immediately sprinkle a layer of dry cement, appearance of wet points or lines is leaking holes or seam.

(2) 如上述办法尚不能检查渗水的位置时,可用水泥胶泥(水泥:促凝剂为1:1)在漏水处涂一薄层,并立刻在外表平均撒上一薄层一干水泥,干水泥外表的湿点或湿线就是漏水的孔或缝。
If the above method can’t find find the location of the seepage, available cement mortar can be used (cement: coagulant for 1:1) Put a thin laye
r on leak and immediately looks average and sprinkle a thin layer of dry cement, cement looks wet or shows a wet line, then there is leaking holes or seams.
 

18758032266